MP4 | Video: h264, 1280×720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English + .srt | Duration: 24 lectures (1h 19m) | Size: 299 MB
Learn about emergency health tracking system using GSM and GPS module with Arduino board using heart pulse sensor.
Understand the principles of programming Arduino microcontroller
Be productive with the Arduino IDE, write, compile and upload sketches, install libraries
How to setup the Arduino software and start outputting code
Understand the ways by which the Arduino can communicate with other devices
Measure your heart rate using a dedicated Arduino-compatible sensor
Interface SIM900A GSM Modem with Arduino
Display the heart rate data on I2C type of 16×2 LCD
Use Arduino to transmit heart rate data via SIM900A module
Use Arduino to receive the exact location of the user with GPS tracker and send the accurate location via SMS
Configure and program sensors and modules like Pulse sensor, I2C type of 16×2 LCD, GSM and GPS modules to work with Arduino
Have the confidence to build a complex electronics project maker and prototyper
Improve technology uses in Hospitals
Transmit the data via SIM900A module to send a message and call to the respective person to get the details
An Arduino Uno
A basic understanding of electricity and electronics
A basic working knowledge of the Arduino Uno is required.
Essential tools: a mini breadboard, jumper wires, a multer, a soldering iron and solder, wire cutter
A hands-on projects-based approach with step by step instructions will be used to teach about the Arduino platform
All theory will be explained so you understand all aspects of a project and how/why it works
Line-By-Line Code Reviews so you will understand exactly how the software and hardware play together in a project
1 x SIM900A GSM module, 1 x GPS module, 1 x I2C type 16×2 LCD, 1 x Pulse sensor
Hello, learners! Greetings from Makerdemy. In this course, you will learn how to program the emergency health tracking system using GSM and GPS module with Arduino board using heart pulse sensor.
This is an advanced level course on Arduino. This course is designed for advanced makers. We’ll help you to get started with the basics of creating circuits with the Arduino UNO board. We will show how to measure the heart rate using Arduino and display the data on I2C type 16×2 LCD and send the GPS location to the User via SMS. By the end of this course, you would have built Emergency Tracking Systems using GSM and GPS modules.
The prerequisite for this course is a basic understanding of electrical and electronic concepts and ability to and install software on your computer. Along the way, you will learn about programming, sensors, and communications.
The course split into five parts:
Project 1: In this project, we will teach you how to measure your heart rate using a dedicated Arduino-compatible sensor.
Project 2: In this project, we teach you how to make the connection of I2C type 16×2 LCD and display the message on the screen when the user types on the serial monitor.
Project 3: This project will explain to you how to make a call using SIM900A GSM module which it connects the Mic and Speaker on GSM. Here, in this project will explain the program using Serial and SoftwareSerial communication methods.
Project 4: In this project, you will get the accurate location of the user using Arduino GPS_Get Latitude and Loude Coordinates with SoftwareSerial communication program.
Project 5: In this project, we will teach you how to measure your heart rate using a dedicated Arduino-compatible sensor. Then, we will transmit the data via SIM900A module to send a message and call to the respective person to get the details. Even we will send the GPS location using GPS module, and also display the heartbeat on the 16×2 LCD screen.
This project can be used to develop Wearable for wrist pulse band. This project helps in real to track the people who are not well and cure them of heart stroke.
If you are a technology enthusiast and want to learn the cutting-edge technology, then this is the right course for you.
I will teach you step by step how to go about building this project. I will also share the code with you so that you can replicate the project yourself.
At the end of the course, you’ll be fully familiarized with Arduino and ready to build your electronic security system. I look forward to you joining this course. It provides the complete source code of the real project.
Let’s dive in to learn the concept one by one.
What are you waiting for? Enroll now!
Anyone interested in learning about programming to interface with a curiosity for making electronics and microcontrollers
Makers who have an existing intermediate or better understanding of electronics
This course will benefit the most students who already have at least a basic working experience with the Arduino Uno
Students over 10 years of age, or younger with with adult supervision. Young students should be supervised at all s when using a soldering iron
Entrepreneurs who need to prototype electronics projects or ideas
Eeering Students – Electronics, Electrical & Computer Science
Electronic Geeks, Hobbiest & Art Students
High School Science Students